Manzz Flexible Waterproof Coating (JS II Type)

Product Description:

Manzz Flexible Waterproof Coating (JS II Type) is a two-component polymer waterproof product with a special formula design and color effect to ensure no leakage, providing a more detailed and reassuring waterproof effect. This product is easy to operate, has excellent performance, and has very good waterproof performance. When cement is mixed with this product, a flexible waterproof film is obtained after use, which has good adhesion with concrete and mortar and can form a tight and firm permanent bond. It meets the requirements of Type II standard in GB/T23445-2009 (Polymer Cement Waterproof Coating).

Product features:

Can cover cracks no larger than 2mm;

New environmentally friendly products, non-toxic and pollution-free;

Suitable for long-term immersion environments;

Can be constructed on damp substrates and firmly bonded to the base layer;

The coating has high tensile strength, superior water resistance, and weather resistance;

The coating has good flexibility and can adapt to a certain degree of vibration and displacement of building structures;

The color effect ensures no missed coating and the waterproof effect is significant.

Scope of application:

Roof waterproofing for industrial and civil buildings;

Home decoration projects: such as waterproofing for kitchens, bathrooms, and balconies;

Basements, garages, flower beds, surrounding areas of water supply and drainage pipes, swimming pools, drinking pools, and corners of yin and yang.

Reference dosage:

When painting with a thickness of 1mm, the dosage is approximately 1.8-2.0kg/㎡

Construction technology:

Base treatment:

1. The construction base surface needs to be flat, firm, clean, without water accumulation or leakage.

2. For larger holes and cracks larger than 2mm, repair mortar should be used first for repair;

3. Wet the base surface with clean water until saturated, and proceed with construction when there is no visible water on the base surface.

Usage:

1. First, pour the liquid material into the container and slowly add cement while stirring, thoroughly mixing to form a uniform mixture; After stirring evenly, let it stand for 5 minutes to let the slurry mature, and then stir for a moment before construction (the prepared slurry should be used up within 1 hour); Ingredients: Mix evenly in a weight ratio of 1:1 liquid to cement, with cement being P.O42.5 grade or above ordinary Portland cement.

2. Using a roller or brush for construction, the waterproof layer should generally be applied in at least two layers. The direction of the second layer should be perpendicular to the first layer to achieve the best coverage effect. For areas with large gaps, it is recommended to use fiberglass mesh cloth for reinforcement treatment;

3. The second layer of coating should be applied 2-3 hours after the surface of the first layer dries, and the specific time should be adjusted according to the environmental conditions on site;

4. The thickness of each layer of brush coating should be controlled within 1mm to facilitate curing and solidification; The thickness of the two layers is controlled at around 1.5mm, with a usage of 1.8-2 kg/㎡ per square meter;

5. After the construction of the waterproof layer, it should be cured for 1-2 days, and the next construction process can only be carried out after the waterproof layer is completely cured.