Manzz Quick-application Colored Wall Reinforcer (Transparent)

scope of application

Suitable for brick walls, cement mortar plastering layers, base sealing and wall reinforcement treatment after removing old coatings (with loose and powdery phenomena).

Old paint film: Remove the old paint film before reuse.

If there is bulging, cracking, peeling, or powdering on the base or old paint film, it should be removed, and then reinforced with a reinforcing agent, and the base should be leveled. If there is water seepage at the grassroots level, waterproofing treatment should be carried out before repair.

Usage instructions

● Substrate cleaning: Ensure that the wall is clean, dry, and flat, ensure that the surface humidity of the pre coated substrate is less than 10%, remove surface dust, grease, and loose mud, and repair any pores in a timely manner;

● Apply wall reinforcement agent: Apply Manzz Quick Shibao colored wall reinforcement agent once, paying attention to complete application and avoiding omissions; For substrates that are porous, dry, and have high absorption rates, it is recommended to apply a second coat after the first coat of drying. It should be ensured that the base layer of the wall reinforcement agent is not loose after drying in order to be considered qualified for application;

● Wool treatment: For smooth concrete surfaces, wool treatment is required. Mix Manzz Kuaishi Bao colored wall reinforcement agent with cement in an appropriate amount to form a paste, and apply it to a smooth base using tools; Note that the reinforcing agent for the frosted wall should not be diluted with water, and the putty can only be applied after the frosted layer has dried for 24 hours.

● Apply putty: After the wall reinforcement agent is fully dried, apply putty leveling and embedding treatment.