Manzz Express Application Polymer Cement Waterproof Coating

Product features:

The coating has high tensile strength and superior water resistance, durability, crack resistance, and impermeability;

Good adhesion to the substrate and high bonding strength;

• Can be used on damp substrates;

Can be used in environments with long-term immersion, such as pools, swimming pools, etc;

The tiles on the waterproof layer are pasted with tile adhesive;

• Green and environmentally friendly.

Scope of application:

Suitable for various waterproofing projects, such as kitchens, bathrooms, sinks, exterior walls, basements, underground garages, etc;

Indoor and outdoor concrete structures, cement plastering, and masonry structures.

Construction technology:

1. First, pour the liquid material into the container and slowly add cement while stirring, thoroughly mixing to form a uniform mixture; After stirring evenly, let it stand for 5 minutes to let the slurry mature, and then stir for a moment before construction (the prepared slurry should be used up within 1 hour); Ingredients: Mix evenly in a weight ratio of 1:0.8 between liquid and cement, with cement being P.O42.5 grade or above ordinary Portland cement.

2. Using a roller or brush for construction, the waterproof layer should generally be applied in at least two layers. The direction of the second layer should be perpendicular to the first layer to achieve the best coverage effect. For areas with large gaps, it is recommended to use fiberglass mesh cloth for reinforcement treatment;

3. The second layer of coating should be applied 2-3 hours after the surface of the first layer dries, and the specific time should be adjusted according to the environmental conditions on site;

4. The thickness of each layer of brush coating should be controlled within 1mm to facilitate curing and solidification; The thickness of the two layers should be controlled at around 1.5mm, with a usage of 1.8-2 kg/㎡ per square meter;

5. After the construction of the waterproof layer, it should be cured for 1-2 days, and the next construction process can only be carried out after the waterproof layer is completely cured.