Manzz Alkali-resistant & Damp-proof Odorless Wall Reinforcer

Usage instructions:

1. Wall reinforcement treatment (mortar, concrete):

After diluting with 50% water, use a brush or roller to evenly apply Manzz anti alkali, moisture-proof, and odorless wall reinforcement agent on the base surface. Wait for it to dry until it does not touch your hands for about 1-2 hours before proceeding to the next construction step; To increase the adhesion between the putty layer and the base surface and reduce the water absorption rate of the base surface.

2. Cement wool treatment agent:

Mix two parts of cement with 42.5 ordinary Portland cement and one part of Manzz alkali resistant, moisture-proof, and odorless wall reinforcement agent. Apply them evenly to the wall to form a 1-2mm cement wool treatment layer. After hardening, proceed to the next process.

3. Additives for cement plaster layer:

Thin cushion layer: 1 part cement+1 part fine sand, then mixed evenly with Manzz alkali resistant, moisture-proof, and odorless wall reinforcement agent, and applied by scraping.

Thick cushion layer: 1 part cement+3 parts medium sand, then mixed evenly with Manzz alkali resistant, moisture-proof, and odorless wall reinforcement agent, and applied by scraping.