Service Online
400-0177-727
Usage instructions
Use Canuo alkali resistant primer as a matching material.
The surface before painting should be free of grease, dust, and loose substances. Newly constructed walls must be fully dried, and the surface moisture content of the wall (or putty) must be less than 10%, with a pH value below 10.
Used tools should be immediately cleaned with soap and warm water. Do not reuse utensils that have come into contact with different types and performance paints. If necessary, the residue should be removed and thoroughly cleaned before use.
Stir evenly before use.
Manzz Huwaibao UV resistant exterior wall paint can be painted using paint sweeping, rolling, or spraying methods, usually requiring two coats. Normally, there should be at least a 2-hour interval between each coat (based on touch dry at 25 ℃). During winter construction, the recoating time should be appropriately extended; Do not polish the final coat of paint.
During construction, it is required that the base temperature should not be lower than 10 ℃ or the environmental humidity should not exceed 85%.
Manzz Huwaibao UV resistant exterior wall paint should be diluted with water, usually adding one part of water (dilution ratio of 10% -20%) to 5 to 10 parts of wall paint.
When using dark colored products for construction, it is recommended not to dilute them with water. If necessary for construction, please control the dilution ratio within 5% and increase the number of coats appropriately until satisfactory results are achieved.
In theory, each liter of Manzz protective outer wall paint is sufficient to apply 8-10 square meters per coat (based on a dry film of 30 microns), usually twice to achieve the best effect. The actual brushing area may vary depending on the construction method and surface roughness.
Manzz protective outer wall paint must be stored in a cool and dry place to prevent frost (not lower than 5 ℃).
