Manzz Ceramic Delight Base-Free Exterior Wall Paint (Specialized for Tile Renovation)

Scope of use

Mosaic exterior walls, ceramic tiles (non vitrified tiles), and walls with hard substrates

Product Features

1. No interface agent, no primer, and process saving.

2. Excellent anti alkali, anti salt precipitation, anti mold, and moisture-proof properties.

3. Excellent weather resistance.

4. Acid resistant rain

Usage instructions

Stir evenly before use.

The surface before painting should be free of grease, dust, and loose substances. Newly constructed walls must be fully dried, using hard putty or direct cement walls. The surface moisture content of the wall (or putty) must be less than 10%, and the pH value must be below 10.

Used tools should be immediately cleaned with soap and warm water. Do not reuse utensils that have come into contact with different types and performance paints. If necessary, the residue should be removed and thoroughly cleaned before use.

This product can be painted using paint sweep, roller or spray methods, usually requiring two coats. Under normal circumstances, the interval between each coat should be at least 2 hours (based on touch dry at 25 ℃). During winter construction, the recoating time should be appropriately extended; Do not polish the final coat of paint.

During construction, it is required that the base temperature should not be lower than 5 ℃ or the environmental humidity should not exceed 85%.

This product needs to be diluted with water, usually adding one part of water (dilution ratio 0% -20%) to 5 to 10 parts of wall paint.

When using dark colored products for construction, it is recommended not to dilute them with water. If necessary for construction, please control the dilution ratio within 5% and increase the number of coats appropriately until satisfactory results are achieved.

In theory, each kilogram of this product is sufficient to apply 4-5 ㎡/2 coats, usually twice to achieve the best effect. The actual brushing area may vary depending on the construction method and surface roughness.

This product must be stored in a cool and dry place to prevent frost (not lower than 5 ℃).