Manzz Refreshing and Beautiful Exterior Wall Latex Paint

DESCRIPTION

Manzz Huanran Beauty Exterior Wall Latex Paint is a water-based and environmentally friendly exterior wall product that uses excellent raw materials and formulas. It has many advantages such as excellent weather resistance, washability, high coverage, good adhesion, rich colors, and excellent color retention. It is suitable for the decoration and protection of exterior walls of residential buildings, hotels, office buildings, schools, and other buildings.

Usage instructions

Please use Manzz universal alkali resistant primer.

The surface before painting should be free of grease, dust, and loose substances. Newly constructed walls must be fully dried, and the surface moisture content of the wall (or putty) must be less than 10%, with a pH value below 10.

Used tools should be immediately cleaned with soap and warm water. Do not reuse utensils that have come into contact with different types and performance paints. If necessary, the residue should be removed and thoroughly cleaned before use.

Before using this product, please stir it evenly.

This product can be painted using paint sweep, roller or spray methods, usually requiring two coats. Under normal circumstances, the interval between each coat should be at least 2 hours (based on touch dry at 25 ℃). During winter construction, the recoating time should be appropriately extended; Do not polish the final coat of paint.

During construction, it is required that the base temperature should not be lower than 10 ℃ or the environmental humidity should not exceed 85%.

This product needs to be diluted with water, usually adding one part of water (dilution ratio of 10% -20%) to 5 to 10 parts of wall paint.

When using dark colored products for construction, it is recommended not to dilute them with water. If necessary for construction, the dilution ratio should be controlled within 5% and the number of coats should be appropriately increased until satisfactory results are achieved.

In theory, each kilogram of this product is sufficient to apply 8-10 square meters per coat (based on a dry film of 30 microns), usually twice to achieve the best effect. The actual brushing area may vary depending on the construction method and surface roughness.

This product must be stored in a cool and dry place to prevent frost (not lower than 5 ℃).