Manzz Quick-Application Exterior Wall Paint

DESCRIPTION

Manzz Kuaishi Bao exterior wall paint is a cost-effective exterior wall paint. This product has good alkali resistance, strong paint film, good weather resistance, high coverage, strong adhesion and other functions, which can provide long-lasting protection for exterior walls. Specially suitable for exterior wall decoration and protection of office buildings, apartments, hotels, and factories.

Usage instructions

Please use Manzz universal alkali resistant primer in combination.

The surface before painting should be free of grease, dust, and loose substances. Newly constructed walls must be fully dried, and the surface moisture content of the wall (or putty) must be less than 10%, with a pH value below 10.

Used tools should be immediately cleaned with soap and warm water. Do not reuse utensils that have come into contact with different types and performance paints. If necessary, the residue should be removed and thoroughly cleaned before use.

Stir evenly before use.

This product can be painted using brush coating, roller coating, or spray coating methods, usually requiring two coats. Under normal circumstances, the interval between each coat should be at least 2 hours (based on touch dry at 25 ℃). During winter construction, the recoating time should be appropriately extended; Do not polish the final coat of paint.

During construction, it is required that the base temperature should not be lower than 5 ℃ and the environmental humidity should not exceed 85%.

This product needs to be diluted with water, usually adding one part of water (dilution ratio of 10% -20%) to 5 to 10 parts of wall paint.

When using dark colored products for construction, it is recommended to use the same colored primer and do not dilute the topcoat with water. If necessary for construction, please control the dilution ratio within 5% and increase the number of coats appropriately until satisfactory results are achieved.

The theoretical paint consumption of this product is 8 to 10 square meters per kilogram (based on a dry film of 30 microns), usually brushed twice to achieve the best effect. The actual brushing area may vary depending on the construction method and surface roughness.

This product must be stored in a cool and dry place to prevent frost (not lower than 5 ℃).